COMPOSITE AUXILIARY MATERIALS, TOOLING & EQUIPMENT

We are distributor for Auxilliary materials for Composite Parts manufacturing for Aerospace, Automobile, Marine and construction industry. We also support various Composite repair equipment and miscellaneous accessories used for composite fabrications. 

 

AUXILIARY MATERIALS

ETO2197 (BPTO2197)

VACUUM FILMS

Is a flexible film to enclose the part and seal it from outside air. Vacuum bag material is available in a tube shape or a sheet of material. A vacuum is then drawn on the vacuum bag and atmospheric pressure compresses the part during the cure. When a tube shaped bag is used, the entire part can be enclosed within the bag. When using sheet bagging materials, the edges of the vacuum bag are sealed against the edges of the mould surface to enclose the part against an air-tight mould. Vacuum Film temperature compatible range 100°C to 400°C

ETO2380 (BPTO2380)

RELEASE FILMS

Mainly used during simple debulking operations. Used in various composite product manufacturing processes. Retain necessary quantity of resin in the laminate, can be used to release ancillary materials from the part. Different perforation sizes available. Release Film temperature compatible range 120°C to 316°C

SEALANT TAPES

For sealing of vacuum bag in ply compaction and debulking operations, For sealing of vacuum for debulking / compacting, envelope bagging, resin damming or as pressure strip. For sealing of vacuum bag on the mould or for sealing film in ovens and autoclaves. Can be used in high temperature processes for envelope bagging, resin damming or as pressure strip. For sealing of vacuum bag in processes  with ultra-high temperature. Sealing tape temperature compatible range 100°C to 420°C

 

RELEASE FABRICS

It provides controlled porosity and release from all conventional resin systems. Used in various composite product manufacturing processes. 
Temperature range maximum 
260°C 
Thickness Range : 40 to 150µm

PEEL PLIES

Specially designed for structural bonding by production of high performance composite parts. Polyester peel plies without release coating, Polyamide peel plies without release coating, Polyamide peel plies with release coating. Temperature range maximum of 180°C to 250°C 
 

BREATHERS / BLEEDERS

Non-woven fabrics for improving of vacuum bagging process by diverse range of pressures and temperatures. Can be used as absorbing material in the process up to 2 bars. Can be used as breather and absorbing coat for medium to high pressure cycles.

Temperature range maximum of 205°C to 400°C 
 

ADHESIVE TAPES

All-purpose double-backed holding tape, Transparent tapes, High Strength adhesive tape, Release tape, Masking tape, Holding tape  etc.,.
Carrier Type: Cloth, Vinyl, Polyester, PTFE, Polyimide.

Adhesive Type: Rubber, Acrylic, Silicone.

Temperature range maximum of 60°C to 399°C 

RUBBER

High strength compound with a catalyst cured system. It is a cured transparent elastomer with excellent elongation properties and low modulus values, which make it an ideal choice for deep, draw vacuum applications. Cured silicone elastomer, transparent, for making re-usable vacuum bags. Uncured silicone elastomer, transparent, for making re-usable vacuum bags. High temperature uncured  or cured heat-resistant elastomer ranges.

Temperature range maximum 204 to 343°C 

Elongation Range : 210 to 1100%
 

TOOL RELEASE

Semi-permanent tooling release films, Cleaning agents, Sealers, Release agent solvent based, Release agent water based, Release agent wax based, Internal release agents, additives and special surface treatment etc.

VALVES & HOSES

Vacuum gauge, Vacuum Hose, Quick release Socket Connector, Quick release Plug, Blanking caps, Valves, High temperature hoses, fittings and associated repair kits. 

TOOLING MATERIALS

Non-wovenSet of technological tool – master-model for composite skin tool manufacturing in resin infusion technology according to the Specification of the customer. Polyurethane board, Epoxy adhesive for bonding of boards , Two-component compound for master model build-up etc.

RESIN INFUSION MATERIALS

Adhesive spay for temporary bonding in resin infusion process, Resin line clamp, High temperature resin infusion connector, Resin line clamping device, L-Fittings for low temperature resin infusion, T-Fittings for low temperature resin infusion, Polyamide spiral wrap for high temperature resin infusion process, Soft woven distribution mesh for high temperature resin infusion process etc.

MASTER MODEL MATERIALS

Tool manufacturing using infusion process. The manufacturing of tools, which can be used in autoclaves and ovens at temperature till 200°C. Industrial repair of high temperature tooling in aircraft and aerospace industries. Making wash-away mandrels for manufacturing of geometrically complex parts. Rapid build-up of gel coat and hard, durable, impact and chemical resistant tools and moulds . Production of master-models for foundry, core
and any other tools machined in CNC machines

TOOLING & EQUIPMENT

MATERIALS FOR VACUUM LINES

Adhesive Spray

Resin Line Clamp

Resin Line Clamp

Resin Line Clamp

HIGH TEMPERATURE MATERIALS FOR VACUUM / RESIN LINES

HIGH TEMPERATURE MATERIALS FOR VACUUM / RESIN LINES

Silicon Pressure Tubing

Polyamide Spiral Wrap

Polyamide T Fitting

VACUUM HOSE & FITTINGS

TBA

NEWS & UPDATES

Find us on ARIBA Network

July 1, 2019

Meet us at Asia-Pacific MRO BOOTH 439 Singapore 07...

September 9, 2018

AQS distributes Aviation LED Lightings

June 22, 2018

1/1
Please reload

SUBSCRIBE FOR UPDATES AND OFFERS

MENU

CONTACT US

TEL:  +65-64937018

FAX: +65-64937019

sales@aqsupplier.com

leasing@aqsupplier.com

#09-03, AVIATION TWO,

690 WEST CAMP ROAD,

SELETAR AEROSPACE PARK,

SINGAPORE - 797523

©  2018 AEROSPACE QUALITY SUPPLIERS PTE LTD

© AQS COPYRIGHT CONTENTS